This page was exported from Braindump2go Free Exam Dumps with PDF and VCE Collection [ https://www.mcitpdump.com ] Export date:Thu Nov 21 20:22:16 2024 / +0000 GMT ___________________________________________________ Title: [October-2020]Braindump2go 350-401 PDF and VCE Dumps Free Download[Q208-Q230] --------------------------------------------------- 2020/October Latest Braindump2go 350-401 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 350-401 Real Exam Questions!QUESTION 208Refer to the exhibit. R1 is able to ping the R3 fa0/1 interface. Why do the extended pings fail?A. The maximum packet size accepted by the command is 1476 bytes.B. R3 is missing a return route to 10.99.69.0/30C. R2 and R3 do not have an OSPF adjacencyD. The DF bit has been setAnswer: DQUESTION 209How does SSO work with HSRP to minimize network disruptions?A. It enables HSRP to elect another switch in the group as the active HSRP switch.B. It ensures fast failover in the case of link failure.C. It enables data forwarding along known routes following a switchover, white the routing protocol reconverges.D. It enables HSRP to failover to the standby RP on the same device.Answer: AExplanation:QUESTION 210Refer to the exhibit. Which command allows hosts that are connected to FastEthernet0/2 to access the Internet?A. ip nat inside source list 10 interface FastEthernet0/1 overloadB. ip nat inside source list 10 interface FastEthernet0/2 overloadC. ip nat outside source list 10 interface FastEthernet0/2 overloadD. ip nat outside source static 209.165.200.225 10.10.10.0 overloadAnswer: AQUESTION 211An engineer configures monitoring on SW1 and enters the show command to verify operation. What does the output confirm?A. SPAN session 1 monitors activity on VLAN 50 of a remote switchB. SPAN session 2 only monitors egress traffic exiting port FastEthernet 0/14.C. SPAN session 2 monitors all traffic entering and exiting port FastEthernet 0/15.D. RSPAN session 1 is incompletely configured for monitoringAnswer: CQUESTION 213Which two characteristics define the Intent API provided by Cisco DNA Center? (Choose two.)A. northbound APIB. business outcome orientedC. device-orientedD. southbound APIE. proceduralAnswer: ABExplanation:QUESTION 214Refer to the exhibit. An engineer must create a configuration that executes the show run command and then terminates the session when user CCNP legs in.Which configuration change is required?A. Add the access-class keyword to the username commandB. Add the access-class keyword to the aaa authentication commandC. Add the autocommand keyword to the username commandD. Add the autocommand keyword to the aaa authentication commandAnswer: CQUESTION 215Refer to the exhibit. What is the effect of the configuration?A. The device will allow users at 192.168.0.202 to connect to vty lines 0 through 4 using the password ciscotestkeyB. The device will allow only users at 192 168.0.202 to connect to vty lines 0 through 4C. When users attempt to connect to vty lines 0 through 4. the device will authenticate them against TACACS* if local authentication failsD. The device will authenticate all users connecting to vty lines 0 through 4 against TACACS+Answer: DQUESTION 216How is a data modeling language used'A. To enable data to be easily structured, grouped validated, and replicatedB. To represent finite and well-defined network elements that cannot be changed.C. To model the flows of unstructured data within the infrastructure.D. To provide human readability to scripting languagesAnswer: DExplanation:QUESTION 217Which three methods does Cisco DNA Centre use to discover devices? (Choose three)A. CDPB. SNMPC. LLDPD. pingE. NETCONFF. a specified range of IP addressesAnswer: ACFExplanation:QUESTION 218Refer to the exhibit. Which command when applied to the Atlanta router reduces type 3 LSA flooding into the backbone area and summarizes the inter-area routes on the Dallas router?A. Atlanta(config-route)#area 0 range 192.168.0.0 255.255.248.0B. Atlanta(config-route)#area 0 range 192.168.0.0 255.255.252.0C. Atlanta(config-route)#area 1 range 192.168.0.0 255.255.252.0D. Atlanta(config-route)#area 1 range 192.168.0.0 255.255.248.0Answer: CQUESTION 219Refer to the exhibit. An engineer is installing a new pair of routers in a redundant configuration. Which protocol ensures that traffic is not disrupted in the event of a hardware failure?A. HSRPv1B. GLBPC. VRRPD. HSRPv2Answer: BQUESTION 220An engineer must configure interface GigabitEthernet0/0 for VRRP group 10. When the router has the highest priority in the group, it must assume the master role. Which command set must be added to the initial configuration to accomplish this task?A. vrrp 10 ip 172.16.13.254vrrp 10 preemptB. standby 10 ip 172.16.13.254standby 10 priority 120C. vrrp group 10 ip 172.16.13 254.255.255.255.0vrrp group 10 priority 120D. standby 10 ip 172.16.13.254 255.255.255.0standby 10 preemptAnswer: CExplanation:QUESTION 221What are two reasons a company would choose a cloud deployment over an on-prem deployment? (Choose Two)A. In a cloud environment, the company controls technical issues. On-prem environments rely on the service provider to resolve technical issue.B. Cloud costs adjust up or down depending on the amount of resources consumed. On- Prem costs for hardware, power, and space are ongoing regardless of usageC. Cloud deployments require long implementation times due to capital expenditure processes. On-Prem deployments can be accomplished quickly using operational expenditure processes.D. Cloud resources scale automatically to an increase in demand. On-prem requires additional capital expenditure.E. In a cloud environment, the company is in full control of access to their data. On-prem risks access to data due to service provider outagesAnswer: BDExplanation:QUESTION 222Refer to the exhibit. Which command must be applied to R2 for an OSPF neighborship to form?A. network 20.1.1.2.0.0.0.0 area 0B. network 20.1.1.2 255.255.0.0. area 0C. network 20.1.1.2.0.0.255.255 area 0D. network 20.1.1.2 255.255.255 area 0Answer: AQUESTION 223Refer the exhibit. Which router is the designated router on the segment 192.168.0.0/24?A. This segment has no designated router because it is a nonbroadcast network type.B. This segment has no designated router because it is a p2p network type.C. Router Chicago because it has a lower router IDD. Router NewYork because it has a higher router IDAnswer: AQUESTION 224Which antenna type should be used for a site-to-site wireless connection?A. OmnidirectionalB. dipoleC. patchD. YagiAnswer: DExplanation:QUESTION 225Refer to the exhibit. Which two commands ensure that DSW1 becomes root bridge for VLAN 10 and 20?A. spanning-tree mst 1 priority 1B. spanning-tree mst 1 root primaryC. spanning-tree mstp vlan 10,20 root primaryD. spanning-tree mst vlan 10,20 priority rootE. spanning-tree mst 1 priority 4096Answer: BEExplanation:QUESTION 226Refer to the exhibit. Edge-01 is currently operational as the HSRP primary with priority 110. Which command on Edge-02 causes it to take over the forwarding role when Edge-01 is down?A. standby 10 priorityB. standby 10 preemptC. standby 10 trackD. standby 10 timersAnswer: AQUESTION 227What is the purpose of an RP in PIM?A. send join messages toward a multicast source SPTB. ensure the shortest path from the multicast source to the receiver.C. receive IGMP joins from multicast receivers.D. secure the communication channel between the multicast sender and receiver.Answer: AQUESTION 228You are configuring a controller that runs Cisco IOS XE by using the CLI. Which three configuration options are used for 802.11w Protected Management Frames? (Choose three.)A. mandatoryB. association-comebackC. SA teardown protectionD. saquery-retry-timeE. enableF. comeback-timeAnswer: ABDQUESTION 229During deployment, a network engineer notices that voice traffic is not being tagged correctly as it traverses the network. Which COS to DSCP map must be modified to ensure that voice traffic is treated properly?A. COS of 5 to DSCP 46B. COS of 7 to DSCP 48C. COS of 6 to DSCP 46D. COS of 3 to DSCP of 26Answer: AQUESTION 230Refer to the exhibit.Tunnel-Private-Group-Id(81): 15Tunnel-Medium-Type(65): IEEE-802(6) Tunnel-Type(64): VLAN(13) A wireless client is connecting to FlexAP1 which is currently working standalone mode. The AAA authentication processis returning the following AVPs:Which three behaviors will the client experience? (Choose three.)A. While the AP is in standalone mode, the client will be placed in VLAN 15.B. While the AP is in standalone mode, the client will be placed in VLAN 10.C. When the AP transitions to connected mode, the client will be de-authenticated.D. While the AP is in standalone mode, the client will be placed in VLAN 13.E. When the AP is in connected mode, the client will be placed in VLAN 13.F. When the AP transitions to connected mode, the client will remain associated.G. When the AP is in connected mode, the client will be placed in VLAN 15.H. When the AP is in connected mode, the client will be placed in VLAN 10.Answer: ADEResources From:1.2020 Latest Braindump2go 350-401 Exam Dumps (PDF & VCE) Free Share:https://www.braindump2go.com/350-401.html2.2020 Latest Braindump2go 350-401 PDF and 350-401 VCE Dumps Free Share:https://drive.google.com/drive/folders/1EIsykNTrKvqjDVs9JMySv052qbrCpe8V?usp=sharing3.2020 Free Braindump2go 350-401 PDF Download:https://www.braindump2go.com/free-online-pdf/350-401-PDF(205-216).pdfhttps://www.braindump2go.com/free-online-pdf/350-401-PDF-Dumps(194-204).pdfhttps://www.braindump2go.com/free-online-pdf/350-401-VCE(229-242).pdfhttps://www.braindump2go.com/free-online-pdf/350-401-VCE-Dumps(217-228).pdfFree Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams! --------------------------------------------------- Images: --------------------------------------------------- --------------------------------------------------- Post date: 2020-10-27 03:05:50 Post date GMT: 2020-10-27 03:05:50 Post modified date: 2020-10-27 03:05:50 Post modified date GMT: 2020-10-27 03:05:50 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com