This page was exported from Braindump2go Free Exam Dumps with PDF and VCE Collection [ https://www.mcitpdump.com ] Export date:Sat Nov 23 13:09:54 2024 / +0000 GMT ___________________________________________________ Title: [November-2020]Braindump2go NSE5_FMG-6.2 PDF and NSE5_FMG-6.2 VCE Instant Download[Q17-Q35] --------------------------------------------------- 2020/November Latest Braindump2go NSE5_FMG-6.2 Exam Dumps with PDF and VCE Free Updated Today! Following are some new NSE5_FMG-6.2 Real Exam Questions!QUESTION 17You are moving managed FortiGate devices from one ADOM to a new ADOM. Which statement correctly describes the expected result?A. Any pending device settings will be installed automaticallyB. Any unused objects from a previous ADOM are moved to the new ADOM automaticallyC. The shared policy package will not be moved to the new ADOMD. Policy packages will be imported into the new ADOM automaticallyCorrect Answer: DQUESTION 18Refer to the exhibit.An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.What is the purpose of this command?A. It allows FortiGate to unset central management settings.B. It allows FortiGate to reboot and recover the previous configuration from its configuration file.C. It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.D. It allows FortiGate to reboot and restore a previously working firmware image.Correct Answer: BQUESTION 19Which two items does an FGFM keepalive message include? (Choose two.)A. FortiGate configuration checksumB. FortiGate IPS versionC. FortiGate license informationD. FortiGate uptimeCorrect Answer: ABQUESTION 20An administrator would like to create an SD-WAN using central management in the Training ADOM. To create an SD-WAN using central management, which two steps must be completed? (Choose two.)A. Specify a gateway address when you create a default SD-WAN static routeB. Enable SD-WAN central management in the Training ADOMC. Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD- WAN template settingsD. Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfacesCorrect Answer: BDQUESTION 21What is the purpose of ADOM revisions?A. To create System Checkpoints for the FortiManager configuration.B. To save the current state of the whole ADOM.C. To save the current state of all policy packages and objects for an ADOM.D. To revert individual policy packages and device-level settings for a managed FortiGate by reverting to a specific ADOM revisionCorrect Answer: CQUESTION 22Refer to the exhibit. What can you conclude from the failed installation log shown in the exhibit?A. Policy ID 2 will not be installed.B. Policy ID 2 is installed without a source device.C. Policy ID 2 is installed without a source address.D. Policy ID 2 is installed in the disabled state.Correct Answer: BQUESTION 23An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.Which statement about the global policy package assignment to the newly-created policy packageFortinet is true?A. When a new policy package is created, it automatically assigns the global policies to the new package.B. When a new policy package is created, you need to assign the global policy package from the global ADOM.C. When a new policy package is created, you need to reapply the global policy package to the ADOM.D. When a new policy package is created, you can select the option to assign the global policies to the new package.Correct Answer: AQUESTION 24Refer to the exhibit.Review the Download Import Report.Why is it failing to import firewall policy ID 2?A. Policy ID 2 does not have ADOM Interface mapping configured on FortiManager.B. Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package namedRemote-FortiGate.C. The address object used in policy ID 2 already exists in the ADOM database with any as the interface association, and conflicts with the address object interface association locally on FortiGate.D. Policy ID 2 is configured from the interface any to port6. FortiManager rejects to import this policy because the any interface does not exist on FortiManager.Correct Answer: CQUESTION 25An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.Which troubleshooting step should you take to resolve the issue?A. Make sure the administrator IP address is part of the trusted hostsB. Make sure ADOMs are enabled and the administrator has access to the Global ADOMC. Make sure FortiManager Access is enabled in the administrator profileD. Make sure Offline Mode is disabledCorrect Answer: AQUESTION 26In the event that the primary FortiManager fails, which action must be performed to return the FortiManager HA to a working state?A. The secondary device with highest priority will automatically be promoted to the primary role, and you must manually reconfigure all other secondary devices to point to the new primary device.B. Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.C. Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.D. FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.Correct Answer: BQUESTION 27Refer to the exhibit.If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)A. During discovery, the FortiManager NATed IP address is not set by default on FortiGate.B. FortiGate can announce itself to FortiManager only if the FortiManager non-NATed IP address is configured on FortiGate under central management.C. FortiGate is discovered by FortiManager through the FortiGate NATed IP address.D. If the FGFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.Correct Answer: ACQUESTION 28Refer to the exhibit. Given the configurations shown in the exhibit, what can you conclude from the installation targets in theInstall On column?A. Policy seq.# 3 will not be installed on any managed device.B. Policy seq.# 3 will be installed on the Trainer[NAT] VDOM only.C. Policy seq.# 3 will be installed on all managed devices and VDOMs that are listed under Installation Targets.D. The Install On column value represents successful installations on the managed devices.Correct Answer: CQUESTION 29What will be the result of reverting to a previous revision version in the revision history?A. It will install configuration changes to managed device automaticallyB. It will tag the device settings status as Auto-UpdateC. It will generate a new version ID and remove all other revision history versionsD. It will modify the device-level databaseCorrect Answer: DQUESTION 30What does a policy package status of Conflict indicate?A. The policy package reports inconsistencies and conflicts during a Policy Consistency Check.B. The policy package does not have a FortiGate as the installation target.C. The policy package configuration has been changed on both FortiManager and the managed device independently.D. The policy configuration has never been imported after a device was registered on FortiManager.Correct Answer: AQUESTION 31An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the managed FortiGate.In which database will the configuration be saved?A. Device-level databaseB. Revision history databaseC. ADOM-level databaseD. Configuration-level databaseCorrect Answer: CQUESTION 32Refer to the exhibit.An administrator has created a firewall address object which is used in multiple policy packages for multiple FortiGate devices in an ADOM.When the installation operation is performed, which IP/Netmask will be installed on managed devices for this firewall address object?A. 192.168.0.1/24 on Remote-FortiGate10.200.1.0/24 on Remote-FortiGateB. If no dynamic mapping is defined for other FortiGate devices, the object will not be installedC. The FortiManager administrator can choose the value for the firewall address object in the Install Wizard for Remote-FortiGateCorrect Answer: BQUESTION 33Refer to the exhibits.Exhibit one.Exhibit two. An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.What can be the main reason for these unset commands?A. The DNS addresses in the default system settings are the same as the Training system templateB. The Training system template has other default settingsC. The ADOM is locked by another administratorD. The Training system template does not have assigned devicesCorrect Answer: BQUESTION 34Refer to the exhibit. You are using the Quick Install option to install configuration changes on the managed FortiGate. Which two statements correctly describe the result? (Choose two.)A. It will not create a new revision in the revision historyB. It installs device-level changes to FortiGate without launching the Install WizardC. It cannot be canceled once initiated and changes will be installed on the managed deviceD. It provides the option to preview configuration changes prior to installing themCorrect Answer: BCQUESTION 35An administrator has enabled Service Access on FortiManager.What is the purpose of Service Access on the FortiManager interface?A. Allows FortiManager to download IPS packagesB. Allows FortiManager to respond to request for FortiGuard services from FortiGate devicesC. Allows FortiManager to run real-time debugs on the managed devicesD. Allows FortiManager to automatically configure a default routeCorrect Answer: BResources From:1.2020 Latest Braindump2go NSE5_FMG-6.2 Exam Dumps (PDF & VCE) Free Share:https://www.braindump2go.com/nse5-fmg-6-2.html2.2020 Latest Braindump2go NSE5_FMG-6.2 PDF and NSE5_FMG-6.2 VCE Dumps Free Share:https://drive.google.com/drive/folders/1PFJC9hxi37c3US9WUn4VMU0aUHfbRlXH?usp=sharing3.2020 Free Braindump2go NSE5_FMG-6.2 PDF Download:https://www.braindump2go.com/free-online-pdf/NSE5_FMG-6.2-Dumps(12-22).pdfhttps://www.braindump2go.com/free-online-pdf/NSE5_FMG-6.2-PDF-Dumps(1-11).pdfhttps://www.braindump2go.com/free-online-pdf/NSE5_FMG-6.2-VCE-Dumps(23-35).pdfFree Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams! --------------------------------------------------- Images: http://examgod.com/bdimages/November-2020Q17-Q35_8911/image_thumb1_thumb.png https://www.mcitpdump.com/file:///C:/Users/KongWei/AppData/Local/Temp/OpenLiveWriter1112546002/supfiles309F3C/image_thumb7.png https://www.mcitpdump.com/file:///C:/Users/KongWei/AppData/Local/Temp/OpenLiveWriter1112546002/supfiles309F3C/image_thumb8.png https://www.mcitpdump.com/file:///C:/Users/KongWei/AppData/Local/Temp/OpenLiveWriter1112546002/supfiles309F3C/image_thumb9.png https://www.mcitpdump.com/file:///C:/Users/KongWei/AppData/Local/Temp/OpenLiveWriter1112546002/supfiles309F3C/image_thumb10.png https://www.mcitpdump.com/file:///C:/Users/KongWei/AppData/Local/Temp/OpenLiveWriter1112546002/supfiles309F3C/image_thumb12.png https://www.mcitpdump.com/file:///C:/Users/KongWei/AppData/Local/Temp/OpenLiveWriter1112546002/supfiles309F3C/image_thumb13.png https://www.mcitpdump.com/file:///C:/Users/KongWei/AppData/Local/Temp/OpenLiveWriter1112546002/supfiles309F3C/image_thumb15.png https://www.mcitpdump.com/file:///C:/Users/KongWei/AppData/Local/Temp/OpenLiveWriter1112546002/supfiles309F3C/image_thumb16.png --------------------------------------------------- --------------------------------------------------- Post date: 2020-11-09 01:54:49 Post date GMT: 2020-11-09 01:54:49 Post modified date: 2020-11-09 01:54:49 Post modified date GMT: 2020-11-09 01:54:49 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com