This page was exported from Braindump2go Free Exam Dumps with PDF and VCE Collection [ https://www.mcitpdump.com ] Export date:Fri Nov 22 0:25:46 2024 / +0000 GMT ___________________________________________________ Title: [NEW UPDATED] Braindump2go 100% Money Back Guarantee For 100% Passing 70-412 Exam Using New Updated Microsoft 70-412 Exam Dumps (221-235) --------------------------------------------------- Microsoft Official Exam Center New Released 70-412 Dumps Questions, Many New Questions added into it! Braindump2go Offer Free Sample Questions and Answers for Download Now! Visit Our Webiste, get the new updated Questions then pass Microsoft 70-412 at the first try! Vendor: MicrosoftExam Code: 70-412Exam Name: Configuring Advanced Windows Server 2012 R2 Services QUESTION 221Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2.All servers run Windows Server 2012 R2. Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. Cluster1 contains a file server role named FS1 and a generic service role named SVC1. Server1 is the preferred node for FS1. Server2 is the preferred node for SVC1. You plan to run a disk maintenance tool on the physical disk used by FS1. You need to ensure that running the disk maintenance tool does not cause a failover to occur. What should you do before you run the tool? A.    Run cluster.exe and specify the pause parameter.B.    Run cluster.exe and specify the offline parameter.C.    Run Suspend-ClusterResourceD.    Run Suspend-ClusterNode. Answer: B QUESTION 222Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 is an enterprise root certification authority (CA) for contoso.com.You need to ensure that the members of a group named Group1 can request code signingcertificates. The certificates must be issued automatically to the members.Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A.    From Certificate Templates, modify the certificate template.B.    From Certification Authority, add a certificate template to be issued.C.    From Certificate Authority, modify the CA properties.D.    From Certificate Templates, duplicate a certificate template.E.    From Certificate Authority, stop and start the Active Directory Certificate Services (AD CS) service. Answer: ADExplanation:The correct answers should be A and D: First duplicate it, then modify ithttp://blogs.technet.com/b/deploymentguys/archive/2013/06/14/signing-windows-8-applications-using-an-internal-pki.aspxThe section on “Creating a Custom Certificate Template” shows steps to create and states……”New certificate templates are created by copying an existing template and using the existing template's properties as the default for the new template. Copy the existing certificate template closest to the configuration of the intended new template to minimize the work necessary.”This is step 2 in the creation process. Step 4 is to make desired changes.Building an Enterprise Root Certification Authority in Small and Medium Businesseshttp://technet.microsoft.com/en-us/library/cc700804.aspx QUESTION 223Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 is an enterprise root certification authority (CA) for contoso.com. Your user account is assigned the certificate manager role and the auditor role on the contoso.com CA. Your account is a member of the local Administrators group on Server1.You enable CA role separation on Server1.You need to ensure that you can manage the certificates on the CA. What should you do? A.    Remove your user account from the local Administrators group.B.    Assign the CA administrator role to your user account.C.    Assign your user account the Bypass traverse checking user right.D.    Remove your user account from the Manage auditing and security log user right. Answer: D QUESTION 224Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed. An administrator installs the IP Address Management (IPAM) Server feature on a server named Server2. The administrator configures IPAM by using Group Policy based provisioning and starts server discovery. You plan to create Group Policies for IPAM provisioning. You need to identify which Group Policy object (GPO) name prefix must be used for IPAM Group Policies.What should you do on Server2? A.    From Server Manager, review the IPAM overview.B.    Run the ipamgc.exe tool.C.    From Task Scheduler, review the IPAM tasks.D.    Run the Get-IpamConfiguration cmdlet. Answer: DExplanation:Tricky question. If you review the IPAM Overview, there is nothing that points to that info. But, if you go to the Config. Summary/Access Provisioning Method, you will see the prefix.Better Get-IpamConfiguration cmdlet which shows it on the third column.The answer is D. QUESTION 225Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. The system properties of Server1 are shown in the exhibit. (Click the Exhibit button.) You need to configure Server1 as an enterprise subordinate certification authority (CA). What should you do first? A.    Add RAM to the server.B.    Set the Startup Type of the Certificate Propagation service to Automatic.C.    Install the Certification Authority Web Enrollment role service.D.    Join Server1 to the contoso.com domain. Answer: DExplanation: To add an enterprise CA you first need to that server to the domain. QUESTION 226Drag and Drop QuestionYour network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Server3, and Server4. Server1 and 5erver2 run Windows Server 2008 R2. Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. Failover Clustering is configured to provide highly available virtual machines by using a cluster named Cluster1. Cluster1 hosts 10 virtual machines.Server3 and Server4 run Windows Server 2012 R2.You install the Hyper-V server role and the Failover Clustering feature on Server3 and Server4.You create a cluster named Cluster2.You need to migrate cluster resources from Cluster1 to Cluster2. The solution must minimize downtime on the virtual machines.Which five actions should you perform? To answer, move the appropriate five actions from the list of actions to the answer area and arrange them in the correct order. Answer: Explanation:http://blogs.technet.com/b/hugofe/archive/2012/12/06/best-practices-for-migration-of-cluster-windows-2008-r2-2012-as-melhores-praticas-para-migrar-um-cluster-de-windows-2008-para-windows-2012.aspx QUESTION 227Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. Cluster1 has access to four physical disks. The disks are configured as shown in the following table. You need to identify which disk can be added to a Clustered Storage Space in Cluster1. Which disk should you identify? A.    Disk1B.    Disk2C.    Disk3D.    Disk4 Answer: B QUESTION 228You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed. You attempt to delete a classification property and you receive the error message as shown in the exhibit. (Click the Exhibit button.) You need to delete the is Confidential classification property. What should you do? A.    Delete the classification rule that is assigned the is Confidential classification property.B.    Disable the classification rule that is assigned the is Confidential classification property.C.    Set files that have an is Confidential classification property value of Yes to No.D.    Clear the is Confidential classification property value of all files. Answer: AExplanation:What is the File Classification Infrastructure?The Windows Server 2008 R2 File Classification Infrastructure (FCI) automates classification processes so that you can manage your data more effectively. You can save money and reduce risk by storing and retaining files based on their business value or impact. The built-in solution for file classification provides expiration, custom tasks, and reporting. The extensible infrastructure enables you to meet additional customer classification needs by building rich end-to-end classification solutions that are built on the classification foundation of Windows Server in a consistent and supported way and within the existing Windows file serving platforms. QUESTION 229Hotspot QuestionYour network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. Server1 is configured to resolve single-label names for DNS clients.You need to view the number of queries for single-label names that are resolved by Server1.What command should you run? To answer, select the appropriate options in the answer area. Answer: QUESTION 230You have five servers that run Windows Server 2012 R2. The servers have the Failover Clustering feature installed. You deploy a new cluster named Cluster1. Cluster1 is configured as shown in the following table. Server1, Server2, and Server3 are configured as the preferred owners of the cluster roles.Dynamic quorum management is disabled.You plan to perform hardware maintenance on Server3.You need to ensure that if the WAN link between Site1 and Site2 fails while you are performing maintenance on Servers, the cluster resource will remain available in Site1.What should you do? A.    Add a file share witness in Site1.B.    Enable DrainOnShutdown on Cluster1.C.    Remove the node vote for Server4 and Server5.D.    Remove the node vote for Server3. Answer: CExplanation:C is the answer.Though “A” would seem to work, it does not provide with a reasonable solution to this question.In this case, it is outside the scope of the problem. To minimize administrative effort, “C” is the best answer to this question. QUESTION 231You have a server named Server1 that runs Windows Server 2012 R2. You download and install the Windows Azure Online Backup Service Agent on Server1. You need to ensure that you can configure an online backup from Windows Server Backup. What should you do first? A.    From Windows Server Backup, run the Register Server Wizard.B.    From Computer Management, add the Server1 computer account to the Backup Operators group.C.    From a command prompt, run wbadmin.exe enable backup.D.    From the Services console, modify the Log On settings of the Windows Azure Online Backup Service Agent. Answer: AExplanation:A. Enables you to back up and restore your operating system, volumes, files, folders, and applications from a command prompt.B. To register a server for use with Windows Azure Backup you must run the register server wizardhttp://technet.microsoft.com/en-us/library/hh831677.aspx QUESTION 317Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed. Server1 has an IPv6 scope named Scope1.You implement an additional DHCP server named Server2 that runs Windows Server 2012 R2.You need to provide high availability for Scope1. The solution must minimize administrative effort.What should you do? A.    Install and configure Network Load Balancing (NLB) on Server1 and Server2.B.    Create a scope on Server2.C.    Configure DHCP failover on Server1.D.    Install and configure Failover Clustering on Server1 and Server2. Answer: CExplanation:http://blogs.technet.com/b/canitpro/archive/2013/07/10/step-by-step-dhcp-high-availability-with-windowsserver-2012-r2.aspxhttp://technet.microsoft.com/en-us/library/hh831385.aspxConfigure DHCP failover on the server that created the scope. In this case Server1 created Scope1 therefore DHCP Failover should be configured on Server1 QUESTION 233Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers. The domain controllers are configured as shown in the following table. DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2. You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication. Which tool should you use? A.    Active Directory Domains and TrustsB.    Active Directory Users and ComputersC.    RepadminD.    Ntdsutil Answer: CExplanation:Repadmin.exe is a command line tool that is designed to assist administrators in diagnosing, monitoring, and troubleshooting Active Directory replication problems. Reference: Repadmin Introduction and Technology OverviewNote: If you see question about AD Replication, First preference is AD sites and services, thenRepadmin and then DNSLINT. QUESTION 234Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers. The domain controllers are configured as shown in the following table. DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2. You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication. Which tool should you use? A.    Active Directory Users and ComputersB.    NtdsutilC.    DNS ManagerD.    Active Directory Domains and Trusts Answer: CExplanation:The primary tool that you use to manage DNS servers is DNS Manager, the DNS snap-in in Microsoft Management Console (MMC), which appears as DNS in Administrative Tools on the Start menu. You can use DNS Manager along with other snapins in MMC, further integrating DNS administration into your total network management. It is also available in Server Manager on computers with the DNS Server role installed. You can use DNS Manager to perform the following basic administrative server tasks:* Performing initial configuration of a new DNS server.* Connecting to and managing a local DNS server on the same computer or remote DNS servers on other computers.* Adding and removing forward and reverse lookup zones, as necessary.* Adding, removing, and updating resource records in zones.* Modifying how zones are stored and replicated between servers.* Modifying how servers process queries and handle dynamic updates.Modifying security for specific zones or resource records.In addition, you can also use DNS Manager to perform the following tasks:* Perform maintenance on the server. You can start, stop, pause, or resume the server or manually update server data files.* Monitor the contents of the server cache and, as necessary, clear it.* Tune advanced server options.Configure and perform aging and scavenging of stale resource records that are stored by the server.Reference: DNS Tools QUESTION 235Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers. The domain controllers are configured as shown in the following table. The Branch site contains a perimeter network. For security reasons, client computers in the perimeter network can communicate with client computers in the Branch site only. You plan to deploy a new RODC to the perimeter network in the Branch site. You need to ensure that the new RODC will be able to replicate from DC10. What should you do first on DC10? A.    Run dcpromo and specify the /createdcaccount parameter.B.    Run the Active Directory Domain Services Configuration Wizard.C.    Run the Add-ADDSReadOnlyDomainControllerAccount cmdlet.D.    Enable the Bridge all site links setting. Answer: CExplanation:Creates a read-only domain controller (RODC) account that can be used to install an RODC in Active Directory.Note:* NotesOnce you have added the RODC account, you can add an RODC to a server computer by using the Install-ADDSDomainController cmdlet with the -ReadOnlyReplica switch parameter.* ExampleAdds a new read-only domain controller (RODC) account to the corp.contoso.com domain using the North America site as the source site for the replication source domain controller.C:PS>Add-ADDSReadOnlyDomainControllerAccount -DomainControllerAccountName RODC1 -DomainName corp.contoso.com -SiteName NorthAmerica Reference: Add-ADDSReadOnlyDomainControllerAccount Braindump2go New Released Premium 70-412 Exam Dumps Guarantee You a 100% Exam Success Or We Promise Full Money Back! Download Microsoft 70-412 Exam Dumps Full Version From Braindump2go Instantly! http://www.braindump2go.com/70-412.html --------------------------------------------------- Images: http://www.itexamquiz.com/braindump2go/bdimages/fbff9ea0d3e1_7FEE/110.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wps6C3C.tmp_thumb_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wps8A77.tmp_thumb_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wpsA4CB.tmp_thumb_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wpsC151.tmp_thumb2_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wpsEDFD.tmp_thumb_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wpsC47.tmp_thumb_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wpsC47.tmp4_thumb_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wps3F49.tmp_thumb_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wps76DD.tmp_thumb_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wps974A.tmp_thumb_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/8b1ac6ebfb50_9926/wpsBC09.tmp_thumb_thumb.png http://www.itexamquiz.com/braindump2go/bdimages/fbff9ea0d3e1_7FEE/110.png --------------------------------------------------- --------------------------------------------------- Post date: 2015-01-26 02:55:51 Post date GMT: 2015-01-26 02:55:51 Post modified date: 2015-01-26 02:55:52 Post modified date GMT: 2015-01-26 02:55:52 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com