[New 70-695 Dumps]Braindump2go 70-695 Exam VCE and PDF Dumps 125Q Free Offer[78-88]

2018/September Braindump2go 70-695 Exam Dumps with PDF and VCE New Updated Today! Following are some new 70-695 Real Exam Questions:

1.|2018 Latest 70-695 Exam Dumps (PDF & VCE) 125Q&As Download:

https://drive.google.com/drive/folders/1S9URxShOOpO1Fta4d_3kxkbU24Tt9bej?usp=sharing

QUESTION 78
You have a client computer that has Microsoft Office 2013 installed.
You need to identify whether Office 2013 is activated.
Which command should you run?

A. ospp.vbs /dstatus
B. ospp.vbs /dhistoryacterr
C. ospp.vbs /remhst
D. ospp.vbs /dcmid

Answer: A
Explanation:
https://technet.microsoft.com/en-us/library/ee624350.aspx#section1

QUESTION 79
You have a 32-bit application named App1.
Your company uses the following device types:
- Windows tablets
- Android tablets
- iOS tablets
You need to recommend a solution to ensure that App1 can be used on all devices.
What should you recommend?

A. an app package (appx)
B. a RemoteApp program
C. a Windows Installer (MSI) package
D. A Microsoft Application Virtualization (App-V) application

Answer: B

QUESTION 80
Your network contains one Active Directory forest named contoso.com. The forest has a deployment of Microsoft System Center 2012 R2 Configuration Manager.
You plan to add a server named Server1 as a distribution point. Server1 will be used only by client computers on the internal network that run Windows 8.1 Enterprise. The Windows Deployment Services server role will NOT be installed on Server1.
You need to identify which firewall port on Server1 must be open to ensure that Configuration Manager clients can download application packages from Server1.
Which TCP port should you identify?

A. 53
B. 8080
C. 443
D. 636

Answer: C

QUESTION 81
You have five Microsoft System Center 2012 R2 Configuration Manager Servers.
The servers are configured as shown in the following table.

You need to ensure that the servers in the Seattle, Montreal, and New York City sites contain the same application packages. The solution must minimize administrative effort.
Which cmdlet should you run first?

A. New-CMBoundaryGroup
B. Add-CMDistributionPoint
C. New-CMDistributionPointGroup
D. Add-CMBoundaryToGroup

Answer: C
Explanation:
https://technet.microsoft.com/en-gb/library/hh427335.aspx

QUESTION 82
Hotspot Question
You manage a deployment of Microsoft System Center 2012 R2 Configuration Manager.
The deployment contains the operating system images and the operating system installers shown in the following table.

You plan to create task sequences for the deployment of each operating system image and operating system installer.
You need to identify which boot images can be used to deploy the Windows 8.1 Enterprise operating system images and the operating system installers by using a task sequence.
Which boot images should you identify? To answer, select the valid boot images for each operating system image and operating system installer in the answer area.

Answer:

Explanation:
http://www.systemcentercentral.com/sccm-osd-when-to-use-an-x86-or-x64-boot-image/

QUESTION 83
You have a deployment of Microsoft System Center 2012 R2 Configuration Manager that is used to perform Windows 8.1 installations.
You have a Task sequence named TS1. TS1 is only available to client computers that have the Configuration Manager client installed and are in a collection named Collection1.
You need to use TS1 to perform bare-metal deployments to new client computers.
What should you do?

A. Redeploy TS1.
B. Modify the deployments of TS1.
C. Modify the properties of TS1.
D. Modify the security scope of TS1.

Answer: A

QUESTION 84
Hotspot Question
You manage a deployment of Microsoft System Center 2012 R2 Configuration Manager. Configuration Manager is integrated with the Microsoft Deployment Toolkit (MDT) 2013.
You create an MDT Zero Touch Installation (ZTI) client task sequence named TS1 and deploy TS1 to a test computer named Client1. TS1 continually fails on Client1.
You need to add a task to TS1 to allow you to troubleshoot TS1 from Client1 interactively.
Which type of task should you add to TS1 and which ZTI component should the task reference? To answer, select the appropriate task type and ZTI component in the answer area.

Answer:

QUESTION 85
You have a deployment of Microsoft System Center 2012 R2 Configuration Manager.
You have a client computer named Computer1 that runs Windows 8.1.
You need to identify which property of Computer1 you can use to create a device object in Configuration Manager.
What should you identify?

A. an IPv6 address
B. an IPv4 address
C. a Configuration Manager UUID
D. a MAC address

Answer: D

QUESTION 86
Your network contains three subnets named Subnet1, Subnet2, and Subnet3. A DHCP server named DHCP1 is on Subnet1. All of the client computers on all of the subnets receive an IP address from DHCP1.
Your company deploys a Windows Deployment Services (WDS) infrastructure to Subnet1.
You attempt to deploy Windows 8.1 Enterprise to new client computers in Subnet2 by using PXE boot, but the computers fail to start from PXE.
You verify that all of the TCP and UDP ports required for WDS PXE boot are allowed on the routers between the subnets.
You need to ensure that you can perform PXE boot installations of Windows 8.1 Enterprise successfully on the new client computers on all of the subnets.
What should you do?

A. Add a remote access server to Subnet2 and Subnet3.
B. Add a DHCP server to each subnet.
C. From the WDS server, configure network address translation (NAT).
D. From the properties of the DHCP scope, configure DHCP options 66 and 67.

Answer: D
Explanation:
http://windowsitpro.com/networking/configuring-dhcp-and-wds

QUESTION 87
Your network contains one Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a Windows Deployment Services (WDS) server.
Computer technicians are allowed to configure disk partitions manually and to choose any operating system image when deploying an operating system by using WDS.
All of the operating system images are in the same image group.
You purchase 10 new client computers.
You plan to deploy the same image of Windows 8.1 Enterprise to all of the computers.
You need to ensure that disk configuration and image selection for all of the computers is fully automated.
What is the best action to perform from Server1? More than one answer choice may achieve the goal. Select the BEST answer.

A. Run wdsutil end specify the /Add-Device switch for each client computer.
B. Run wdsutil and specify the /Set-Server switch.
C. Run wdsutil and specify the /Add-ImageGroup switch.
D. Create computer objects in Active Directory for each new client computer.

Answer: A
Explanation:
https://technet.microsoft.com/en-us/library/cc754289(v=ws.10).aspx

QUESTION 88
Drag and Drop Question
You deploy the Microsoft Deployment Toolkit (MDT) to a server named Server1.
You plan to deploy Windows 8.1 Enterprise to client computers by using MDT.
You also plan to deploy two applications named App1 and App2.
You need to ensure that all of the client computers install App1 as part of their deployment of Windows 8.1 Enterprise. The solution must provide users with the ability to choose to install App2.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

1.|2018 Latest 70-695 Exam Dumps (PDF & VCE) 125Q&As Download:

YouTube Video: YouTube.com/watch?v=_3oh5AcvPz4 ¹

1. http://www.youtube.com/watch?v=_3oh5AcvPz4