This page was exported from Braindump2go Free Exam Dumps with PDF and VCE Collection [ https://www.mcitpdump.com ] Export date:Fri Nov 22 7:45:38 2024 / +0000 GMT ___________________________________________________ Title: [March-2018]70-741 Exam PDF and VCE Dumps Free Download in Braindump2go[82-92] --------------------------------------------------- 2018 March New Microsoft 70-741 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 70-741 Real Exam Questions:1.|2018 Latest 70-741 Exam Dumps (PDF & VCE) 135Q&As Download:https://www.braindump2go.com/70-741.html2.|2018 Latest 70-741 Exam Questions & Answers Download:https://drive.google.com/drive/folders/0B75b5xYLjSSNSUt4dmtFZ2pDQkk?usp=sharingQUESTION 82You have a DHCP server named Server1 that runs Windows Server 2016.You have a single IP subnet.Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits.You need to create a second logical IP network on the subnet.The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits.What should you do?A. Create a second scope, and then create a superscope.B. Create a superscope, and then configure an exclusion range in Scope1.C. Create a new scope, and then modify the IPv4 bindings.D. Create a second scope, and then run the DHCP Split-Scope Configuration Wizard.Answer: AQUESTION 83Scenario:You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit. You install the Remote Access server role on Server2.Server2 has the following configured.* Network address translation (NAT)* The DHCP Server server roleThe Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2You identify the following requirements:* Add 28 devices to subnet2 for a temporary project.* Configure Server2 to accept VPN connections from the internet.* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.End of Scenario:You add a computer to subnet1. The computer has an IP address of 10.10.0.129.Web1 receives a request from the new computer and sends a response.What should you do?A. 10.10.0.129B. 10.10.0.224C. 131.107.0.223D. 172.16.128.222Answer: AQUESTION 84A company named Contoso, Ltd has five Hyper-V hosts that are configured as shown in the following table. What are two valid live migration scenarios for virtual machines in your environment?A. from Sever1 to server5B. from Server4 to Server 5C. from Server2 to Server3D. from Server3 to Server4Answer: ACQUESTION 85Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.Server1 is configured to allow domain users to establish VPN connections from 06:00 to18:00 everyday of the week.You need to ensure that domain users can establish VPN connections only between Monday and Friday.Solution: From Active Directory Users and Computers, you modify the Dial-in Properties of the user accounts.Does this meet the goal?A. YesB. NoAnswer: AQUESTION 86You have a server named Server1 that runs Windows Server 2016.Server1 has two network cards. One network card connects to your internal network and the other network card connects to the Internet.You plan to use Server1 to provide Internet connectivity for client computers on the internal network.You need to configure Server1 as a network address translation (NAT) server.Which server role or role service should you install on Server1 first?A. Network ControllerB. Web Application ProxyC. RoutingD. DirectAccess and VPN (RAS)Answer: CQUESTION 87Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.Your network contains an Active Directory domain named contoso.comYou need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2016 source files are located in drive D.Solution: You run the following cmdlet.New-NanoServerImage ­Edition Datacenter ­DeploymentType Host ­Package Mictosoft- NanoServer-SCVMM-Package ­MediaPath `D: -TargetPath C:nano1Nano1.wim ­ComputerName Nano1 ­Domaintiame Contoso.comDoes this meet the goal?A. YesB. NOAnswer: BQUESTION 88Your network contains an Active directory forest named contoso.com.The forest has a Distributed File System (DFS) namespace named \contoso.comnamespace1.The domain contains a file server named Server1 that runs Windows Server 2016.You create a folder named Folder1 on Server1.Which two cmdlets should you use? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.A. New-DfsnFolderTargetB. Install-WindowsFeatureC. Grant-DfsnAccessD. New-DfsnFolderE. New-SmbShareAnswer: AEExplanation:The correct answer is to share the folder and configure the DFSN target.https://docs.microsoft.com/en-us/powershell/module/dfsn/new-dfsnfoldertarget?view=winserver2012r2-psQUESTION 89You have a virtual machine named VM1 that runs Windows Server 2016, VM1 hosts a service that requires high network throughput.VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface, Quality of Service? (QoS), and Receive Side Scaling (RSS).You need to ensure that the traffic from VM1 can be processed by multiple networking processors.Which Windows PowerShell command should you run on the host of VM1?A. Set-NetAdapterRssB. Set-NetAdapterRdmaC. Set-NetAdapterQosD. Set-NetAdapterSriovAnswer: AExplanation:The correct answer is to enable RSS Receive Side Scaling which allows for multiprocessor use.https://docs.microsoft.com/en-us/windows-hardware/drivers/network/introduction-to-receive-side-scalingQUESTION 90Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.Server1 is configured to allow domain users to establish VPN connections from 06:00 to18:00 everyday of the week.You need to ensure that domain users can establish VPN connections only between Monday and Friday.Solution: From Server Manager, You modify the Access Policies on Server1.Does this meet the goal?A. YesB. NoAnswer: AQUESTION 91Your network contains three subnets, a production subnet that contains production servers, a development network that contains development servers, and a client network that contains client computers.The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range.A developer has a client computer on the client network. The developer reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network.You need to ensure that when the developer connects to 10.10.1.6, he connects to a sever on the development networkWhich cmdlet should you use?A. New-NetNeighborB. New-NetRouteC. Set-NetTcpSettingD. Set-NetNeighbirAnswer: BQUESTION 92Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.Your network contains an Active Directory forest named contoso.com.The forest has three sites located in London, Paris and Berlin.The London site contains a web server named Web1 that runs Windows Server 2016.You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.Solution: You install the BranchCache feature, and then you start the BranchCache service.Does this meet the goal?A. YesB. NoAnswer: B!!!RECOMMEND!!!1.|2018 Latest 70-741 Exam Dumps (PDF & VCE) 135Q&As Download:https://www.braindump2go.com/70-741.html2.|2018 Latest 70-741 Study Guide Video: YouTube Video: YouTube.com/watch?v=1cH2EISSbR4 --------------------------------------------------- Images: --------------------------------------------------- --------------------------------------------------- Post date: 2018-03-13 06:38:36 Post date GMT: 2018-03-13 06:38:36 Post modified date: 2018-03-13 06:38:36 Post modified date GMT: 2018-03-13 06:38:36 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com