[FREE DUMPS DOWNLOAD] Braindump2go Guarantees 100% Pass Microsoft 70-411 Test By Using Microsoft 70-411 Test Dumps New Version! (181-195)

Braindump2go New Updated Microsoft 70-411 Dumps Free Download Now! 100% Pass Your 70-411 Exam One Time At Your First Try! Instant Download 70-411 Dumps Full Version From Braindump2go Now!

Vendor: Microsoft
Exam Code: 70-411
Exam Name: Administering Windows Server 2012 R2 Exam

QUESTION 181
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Remote Access server role installed.
You need to configure the ports on Server1 to ensure that client computers can establish VPN connections to Server1 by using TCP port 443.
What should you modify? To answer, select the appropriate object in the answer area.

Answer:

Explanation:
http://technet.microsoft.com/en-us/library/cc771298(v=ws.10).aspx ¹
Secure Socket Tunneling Protocol (SSTP) is a new tunneling protocol that uses the HTTPS protocol over TCP port 443 to pass traffic through firewalls and Web proxies that might block PPTP and L2TP/IPsec traffic.

QUESTION 182
Your network contains two Active Directory domains named contoso.com and adatum.com. The network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the DNS Server server role installed. Server1 has a copy of the contoso.com DNS zone.
You need to configure Server1 to resolve names in the adatum.com domain.
The solution must meet the following requirements:
- Prevent the need to change the configuration of the current name servers that host zones for adatum.com.
- Minimize Administrative effort.
Which type of zone should you create?

A.    Primary
B.    Secondary
C.    Reverse lookup
D.    Stub

Answer: D
Explanation:
A. When a zone that this DNS server hosts is a primary zone, the DNS server is the primary source for information about this zone, and it stores the master copy of zone data in a local file or in AD DS.
B. When a zone that this DNS server hosts is a secondary zone, this DNS server is a secondary source for information about this zone. The zone at this server must be obtained from another remote DNS server computer that also hosts the zone
C. clients use a known IP address and look up a computer name based on its address.
A reverse lookup takes the form of a question, such as "Can you tell me the DNS name of the computer that uses the IP address 192.168.1.20?"
D. When a zone that this DNS server hosts is a stub zone, this DNS server is a source only for information about the authoritative name servers for this zone. The zone at this server must be obtained from another DNS server that hosts the zone.
- Prevents Change to current zone
http://technet.microsoft.com/en-us/library/cc771898.aspx ²
http://technet.microsoft.com/en-us/library/cc730980.aspx ³

QUESTION 183
Your network contains two servers named Server1 and Server2. Both servers run Windows Server 2012 R2 and have the DNS Server server role installed.
On Server1, you create a standard primary zone named contoso.com.
You need to ensure that Server2 can host a secondary zone for contoso.com.
What should you do from Server1?

A.    Add Server2 as a name server.
B.    Convert contoso.com to an Active Directory-integrated zone.
C.    Create a zone delegation that points to Server2.
D.    Create a trust anchor named Server2.

Answer: A
Explanation:
A. You must add a new Name Server. To add a name server to the list of authoritative servers for the zone, you must specify both the server's IP address and its DNS name. When entering names, click Resolve to resolve the name to its IP address prior to adding it to the list.
B. Instead of adding standard secondary DNS servers, you can convert the server from a primary DNS server to an Active Directory Integrated Primary server and configure another domain controller to be a DNS server
C. You can divide your Domain Name System (DNS) namespace into one or more zones.
You can delegate management of part of your namespace to another location or department in your organization by delegating the management of the corresponding zone.
http://technet.microsoft.com/en-us/library/cc770984.aspx ⁴
http://support.microsoft.com/kb/816101 ⁵
http://technet.microsoft.com/en-us/library/cc753500.aspx ⁶
http://technet.microsoft.com/en-us/library/cc771640(v=ws.10).aspx ⁷ http://technet.microsoft.com/en-us/library/ee649280(v=ws.10).aspx ⁸

QUESTION 184
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Remote Access server role installed. On Server1, you create a network policy named Policy1.
You need to configure Policy1 to apply only to VPN connections that use the L2TP protocol.
What should you configure in Policy1?

A.    The Tunnel Type
B.    The Service Type
C.    The NAS Port Type
D.    The Framed Protocol

Answer: A
Explanation:
A. Restricts the policy to only clients that create a specific type of tunnel, such as PPTP or L2TP. B. Restricts the policy to only clients specifying a certain type of service, such as Telnet or Point to Point Protocol connections.
C. Allows you to specify the type of media used by the client computer to connect to the network. D. Restricts the policy to clients that specify a certain framing protocol for incoming packets, such as PPP or SLIP.

http://technet.microsoft.com/en-us/library/cc731220(v=ws.10).aspx ⁹

QUESTION 185
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. All client computers run Windows 8 Enterprise. DC1 contains a Group Policy object (GPO) named GPO1.
You need to deploy a VPN connection to all users.
What should you configure from User Configuration in GPO1?

A.    Preferences/Control Panel Settings/Network Options
B.    Policies/Administrative Templates/Windows Components/Windows Mobility Center
C.    Policies/Administrative Templates/Network/Windows Connect Now
D.    Policies/Administrative Templates/Network/Network Connections

Answer: A
Explanation:
The Network Options extension allows you to centrally create, modify, and delete dial-up networking and virtual private network (VPN) connections.
Before you create a network option preference item, you should review the behavior of each type of action possible with the extension.
http://technet.microsoft.com/en-us/library/cc772449.aspx ¹⁰

QUESTION 186
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. All sales users have laptop computers that run Windows 8. The sales computers are joined to the domain. All user accounts for the sales department are in an organizational unit (OU) named Sales_OU. A Group Policy object (GPO) named GPO1 is linked to Sales_OU.
You need to configure a dial-up connection for all of the sales users.
What should you configure from User Configuration in GPO1?

A.    Policies/Administrative Templates/Network/Windows Connect Now
B.    Policies/Administrative Templates/Windows Components/Windows Mobility Center
C.    Preferences/Control Panel Settings/Network Options
D.    Policies/Administrative Templates/Network/Network Connections

Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/cc772107.aspx ¹¹

QUESTION 187
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has 2 dual-core processors and 16 GB of RAM.
You install the Hyper-V server role in Server1.
You plan to create two virtual machines on Server1.
You need to ensure that both virtual machines can use up to 8 GB of memory.
The solution must ensure that both virtual machines can be started simultaneously.
What should you configure on each virtual machine?

A.    Dynamic Memory
B.    NUMA topology
C.    Memory weight
D.    Ressource Control

Answer: A

QUESTION 188
Your network contains an Active Directory domain named corp.contoso.com. The domain contains a domain controller named DC1. When you run ping dcl.corp.contoso.com, you receive the result as shown in the exhibit. (Click the Exhibit button.)

 
You need to ensure that DC1 can respond to the Ping command.
Which rule should you modify? To answer, select the appropriate rule in the answer area.

Answer:

QUESTION 189
You have a server named Server1 that runs Windows Server 2012 R2.
You promote Server1 to domain controller.
You need to view the service location (SVR) records that Server1 registers on DNS.
What should you do on Server1?

A.    Open the Srv.sys file
B.    Open the Netlogon.dns file
C.    Run ipconfig/displaydns
D.    Run Get-DnsServerDiagnostics

Answer: B

QUESTION 190
Your company has a remote office that contains 600 client computers on a single subnet.
You need to select a subnet mask for the network that will support all of the client computers.
The solution must minimize the number of unused addresses.
Which subnet mask should you select?

A.    255.255.252.0
B.    255.255.254.0
C.    255.255.255.0
D.    255.255.255.128

Answer: A

QUESTION 191
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?

A.    From Windows PowerShell, run Set-Service and specify the -PassThrough parameter.
B.    From a command prompt, run sc.exe and specify the config parameter.
C.    From Windows PowerShell, run Set-Service and specify the -StartupType parameter.
D.    From a command prompt, run sc.exe and specify the privs parameter.

Answer: B
Explanation:
A. General settings only allow you to stop, start and set type/paramaters
B. Set-Service provides a way for you to change the Description, StartupType, or DisplayName of a service
C. Modifies service configuration
D. Sets the response/action on service failure
http://windows.microsoft.com/en-us/windows-vista/using-system-configuration ¹² http://technet.microsoft.com/en-us/library/ee176963.aspx ¹³
http://technet.microsoft.com/en-us/library/cc990290(v=ws.10).aspx ¹⁴ http://technet.microsoft.com/en-us/library/cc738230(v=ws.10).aspx ¹⁵

QUESTION 192
Hotspot Question
Your network contains an Active Directory domain named contoso.com. All client computers are configured as DHCP clients.
You link a Group Policy object (GPO) named GPO1 to an organizational unit (OU) that contains all of the client computer accounts.
You need to ensure that Network Access Protection (NAP) compliance is evaluated on all of the client computers.
Which two settings should you configure in GPO1?
To answer, select the appropriate two settings in the answer area.

Answer:

QUESTION 193
Your network contains an Active Directory domain named contoso.com. All client computers run Windows Vista Service Pack 2 (SP2). All client computers are in an organizational unit (OU) named OU1. All user accounts are in an OU named OU2. All users log on to their client computer by using standard user accounts. A Group Policy object (GPO) named GPO1 is linked to OU1.
A GPO named GPO2 is linked to OU2.
You need to apply advanced audit policy settings to all of the client computers.
What should you do?

A.    In GPO1, configure a startup script that runs auditpol.exe.
B.    In GPO2, configure a logon script that runs auditpol.exe.
C.    In GPO1, configure the Advanced Audit Policy Configuration settings.
D.    In GPO2, configure the Advanced Audit Policy Configuration settings.

Answer: A

QUESTION 194
You have a server that runs Windows Server 2012 R2.
You have an offline image named Windows2012.vhd that contains an installation of Windows Server 2012 R2.
You plan to apply several updates to Windows2012.vhd.
You need to mount Windows2012.vhd to H:. Which tool should you use?

A.    Device Manager
B.    Diskpart
C.    Mountvol
D.    Server Manager

Answer: B
Explanation:

http://technet.microsoft.com/en-us/library/cc753321.aspx ¹⁶

QUESTION 195
Your network contains two Active Directory domains named contoso.com and adatum.com. The contoso.com domain contains a server named Server1.contoso.com. The adatum.com domain contains a server named server2.adatum.com. Server1 and Server2 run Windows Server 2012 R2 and have the DirectAccess and VPN (RRAS) role service installed. Server1 has the default network policies and the default connection request policies.
You need to configure Server1 to perform authentication and authorization of VPN connection requests to Server2.
Only users who are members of AdatumGroup1 must be allowed to connect.
Which two actions should you perform on Server1?
(Each correct answer presents part of the solution. Choose two.)

A.    Network policies
B.    Connection request policies
C.    Create a network policy.
D.    Create a connection request policy.

Answer: AD
Explanation:
* Connection request policies are sets of conditions and settings that allow network administrators to designate which Remote Authentication Dial-In User Service (RADIUS) servers perform the authentication and authorization of connection requests that the server running Network Policy Server (NPS) receives from RADIUS clients. Connection request policies can be configured to designate which RADIUS servers are used for RADIUS accounting.
* With connection request policies, you can use NPS as a RADIUS server or as a RADIUS proxy, based on factors such as the following:
The time of day and day of the week
The realm name in the connection request
The type of connection being requested
The IP address of the RADIUS client

Thanks For Trying Braindump2go Latest Microsoft 70-411 Dumps Questions! Braindump2go Exam DumpsADVANTAGES:

? 100% Pass Guaranteed Or Full Money Back!
? Instant Download Access After Payment!
? One Year Free Updation!
? Well Formated: PDF,VCE,Exam Software!
? Multi-Platform capabilities – Windows, Laptop, Mac, Android, iPhone, iPod, iPad.
? Professional, Quick,Patient IT Expert Team 24/7/365 Onlinen Help You!
? We served more than 35,000 customers all around the world in last 5 years with 98.99% PASS RATE!
? Guaranteed Secure Shopping! Your Transcations are protected by Braindump2go all the time!
? Pass any exams at the FIRST try!

http://www.braindump2go.com/70-411.html

1. http://technet.microsoft.com/en-us/library/cc77129 8(v=ws.10).aspx
2. http://technet.microsoft.com/en-us/library/cc77189 8.aspx
3. http://technet.microsoft.com/en-us/library/cc73098 0.aspx
4. http://technet.microsoft.com/en-us/library/cc77098 4.aspx
5. http://support.microsoft.com/kb/816101
6. http://technet.microsoft.com/en-us/library/cc75350 0.aspx
7. http://technet.microsoft.com/en-us/library/cc77164 0(v=ws.10).aspx
8. http://technet.microsoft.com/en-us/library/ee64928 0(v=ws.10).aspx
9. http://technet.microsoft.com/en-us/library/cc73122 0(v=ws.10).aspx
10. http://technet.microsoft.com/en-us/library/cc77244 9.aspx
11. http://technet.microsoft.com/en-us/library/cc77210 7.aspx
12. http://windows.microsoft.com/en-us/windows-vista/u sing-system-configuration
13. http://technet.microsoft.com/en-us/library/ee17696 3.aspx
14. http://technet.microsoft.com/en-us/library/cc99029 0(v=ws.10).aspx
15. http://technet.microsoft.com/en-us/library/cc73823 0(v=ws.10).aspx
16. http://technet.microsoft.com/en-us/library/cc75332 1.aspx