[Dec-2018]100% Valid 300-070 Dumps VCE 305Q Provided by Braindump2go[Q135-145]

December/2018 Braindump2go 300-070 Exam Dumps with PDF and VCE New Updated Today! Following are some new 300-070 Real Exam Questions:

1.|2018 Latest 300-070 Exam Dumps (PDF & VCE) 305Q & As Downlload:

https://www.braindump2go.com/300-070.html

2.|2018 Latest 300-070 Exam Questions & Answers Download:

https://drive.google.com/drive/folders/0B75b5xYLjSSNVmxoUEhTTmZZMXc?usp=sharing

QUESTION 135
When Cisco Unified Communications Manager software is installed on a Cisco MCS server, which level of access does it provide for the customer to the operating system of the server?

A. CLI and GUI access.
B. CLI access only
C. GUI access only
D. no access.
E. access only through an interface controlled by Cisco TAC

Answer: A

QUESTION 136
What happens when you try to configure the fourth member of a Cisco Unified CallManager group?

A. Cisco Unified CallManager Administration will display an error and replace the last entered member
of the Cisco Unified CallManager group with the new entry.
B. Cisco Unified CallManager Administration will display an error message when you attempt to add the
fourth member.
C. The fourth member will be added to the sequential list.
D. The new member will replace the first member on the list.

Answer: B

QUESTION 137
Which action must you perform before you update Cisco Unified Communications Manager using BAT?

A. Create or edit a CMC or FAC CSV file and insert the file in BAT.
B. Put Cisco Unified CM in BAT service mode.
C. Temporarily disconnect all non-BAT related servers, such as Cisco Presence.
D. Enable promiscuous mode on the Cisco Unified CM BAT database.

Answer: A

QUESTION 138
Which two options are forms of redundancy provided by Cisco Unified Communications Manager? (Choose two.)

A. media resource redundancy
B. CTI redundancy
C. voice-mail redundancy
D. emergency responder redundancy

Answer: AB

QUESTION 139
When a Cisco Unified Communications Manager group has its primary, secondary, and tertiary servers changed, how are those changes propagated to the IP phones registered to the group?

A. The IP phones will automatically register with the new primary server.
B. The IP phones will need to be reset so that a new configuration file can be downloaded from the
TFTP server.
C. The primary Cisco Unified Communications Manager server automatically pushes a new configuration
file to the IP phones in the affected device pool.
D. The device pools will need to be edited so that the new Cisco Unified Communications Manager
group information is applied to the appropriate device pools.

Answer: B

QUESTION 140
Which two Cisco Unified CallManager tasks are required to route calls from Cisco Unified CallManager to the PSTN via an H.323 gateway? (Choose two.)

A. configure the IP phones with an external phone number mask
B. add PSTN route patterns pointing to the gateway
C. add a gatekeeper from the Device menu
D. configure the signaling protocol used on the voice circuit
E. configure the voice endpoints in Cisco Unified CallManager
F. add an H.323 gateway from the Device menu

Answer: BF

QUESTION 141
In the Cisco Unified Communications Manager Administration window, which MOH parameter can be selected for phones and gateways?

A. media resource group list
B. hold stream source
C. hold stream volume
D. media loop timer

Answer: A

QUESTION 142
When a new subscriber is added to a Cisco Unified Communications Manager cluster, how must the subscriber be configured so that is can receive database updates?

A. The subscriber uses the security password configured when the subscriber was configured.
This is also configured in the publisher and validated on the initial replication of the database.
B. The subscriber uses the subscriber security password configured in the publisher.
C. The subscriber uses the same security password configured in the publisher when it was created.
D. The subscriber uses the IDS security password.

Answer: C

QUESTION 143
Refer to the exhibit. ABC Company uses the digit 9 to get a dial tone and type a DN.
A user needs to type 8811202 and automatically send the call to a cellphone. The Network Administrator did this configuration, but it is not working.

Which two actions can the Administrator take to solve this problem? (Choose two)

A. In the Translation Pattern option, delete the digit “8”.
B. In the Translation Pattern option, delete the digit “9”.
C. In the Route Option option, select Block this Pattern.
D. In the Called Party Transform Mask option, prefix the digit “9”.

Answer: BD

QUESTION 144
The Cisco Unified Communications architecture supports which three technologies? (Choose three.)

A. Physical Security
B. Cisco Unified Video Advantage
C. Intelligent Building Management
D. Contact Center
E. Workforce Optimization
F. Smart Grid Management

Answer: BDE

QUESTION 145
What are the three characteristics that govern the type of Cisco Unified Communications Manager deployment model? (Choose three.)

A. number of applications
B. size
C. type of applications
D. network characteristics
E. services provided by the PSTN carrier
F. geographical distribution

Answer: BDF


!!!RECOMMEND!!!

1.|2018 Latest 300-070 Exam Dumps (PDF & VCE) 305Q & As Downlload:

https://www.braindump2go.com/300-070.html

2.|2018 Latest 300-070 Study Guide Video:

https://youtu.be/ryIgNTGPnJg