This page was exported from Braindump2go Free Exam Dumps with PDF and VCE Collection [ https://www.mcitpdump.com ] Export date:Fri Nov 22 0:21:29 2024 / +0000 GMT ___________________________________________________ Title: [Dec-2016-New]Cisco 200-105 VCE and PDF Dumps(Full Version)346q Download in Braindump2go[217-230] --------------------------------------------------- 2016/12 New Cisco 200-105: Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) Exam Questions Updated Today!Free Instant Download 200-105 Exam Dumps (PDF & VCE) 346q from Braindump2go.com Today! 100% Real Exam Questions! 100% Exam Pass Guaranteed! 1.|2016/12 New 200-105 Exam Dumps (PDF & VCE) 346q Download:http://www.braindump2go.com/200-105.html2.|2016/12 New 200-105 Exam Questions & Answers:https://1drv.ms/f/s!AvI7wzKf6QBjgR8N2yzsALYPi7P6 QUESTION 217When are packets processed by an inbound access list? A.    before they are routed to an outbound interfaceB.    after they are routed to an outbound interfaceC.    before and after they are routed to an outbound interfaceD.    after they are routed to an outbound interface but before being placed in the outbound queue Answer: A QUESTION 218Which command can be used from a router to verify the Layer 3 path to a host? A.    tracert addressB.    traceroute addressC.    telnet addressD.    ssh address Answer: B QUESTION 219An access list has been designed to prevent Telnet traffic from the Graphics Department from reaching the HR server attached to the Eastfield router but allow Telnet traffic to other destinations. Given the following access list:access-list 101 deny tcp any any eq 23permit ip any anyOn which router, interface, and in what direction should the access list be placed to most efficiently implement this list? (Choose three.) A.    WestfieldB.    EastfieldC.    e0D.    s0E.    inF.    out Answer: BCF QUESTION 220Which form of NAT maps multiple private IP addresses to a single registered IP address by using different ports? A.    static NATB.    dynamic NATC.    overloadingD.    overlappingE.    port loading Answer: C QUESTION 221Unauthorized users have used Telnet to gain access to a company router. The network administrator wants to configure and apply an access list to allow Telnet access to the router, but only from the network administrator's computer. Which group of commands would be the best choice to allow only the IP address 172.16.3.3 to have Telnet access to the router? A.    access-list 101 permit tcp any host 172.16.3.3 eq telnet interface s0/0ip access-group 101 inB.    access-list 3 permit host 172.16.3.3line vty 0 4access-class 3 inC.    access-list 101 permit tcp any host 172.16.3.3 eq telnet access-list 101 permit ip any anyinterface s0/0ip access-group 101 inD.    access-list 3 permit host 172.16.3.3line vty 0 4ip access-group 3 in Answer: B QUESTION 222Refer to the exhibit. What command sequence will enable PAT from the inside to outside network? A.    (config) ip nat pool isp-net 1.2.4.2 netmask 255.255.255.0 overloadB.    (config-if) ip nat outside overloadC.    (config) ip nat inside source list 1 interface ethernet1 overloadD.    (config-if) ip nat inside overload Answer: C QUESTION 223Which two statements about static NAT translations are true? (Choose two.) A.    They allow connections to be initiated from the outside.B.    They require no inside or outside interface markings because addresses are statically defined.C.    They are always present in the NAT table.D.    They can be configured with access lists, to allow two or more connections to be initiated from the outside. Answer: AC QUESTION 224A network administrator wants to ensure that only the server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the switch Fa0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of the server is allowed by switch port Fa0/1? (Choose two.) A.    Configure port Fa0/1 to accept connections only from the static IP address of the server.B.    Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.C.    Configure the MAC address of the server as a static entry associated with port Fa0/1.D.    Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.E.    Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.F.    Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1. Answer: CE QUESTION 225The company internetwork is subnetted using 29 bits. Which wildcard mask should be used to configure an extended access list to permit or deny access to an entire subnetwork? A.    255.255.255.224B.    255.255.255.248C.    0.0.0.224D.    0.0.0.8E.    0.0.0.7F.    0.0.0.3 Answer: E QUESTION 226A router has been configured to provide the nine users on the branch office LAN with Internet access, as shown in the diagram. It is found that some of the users on the LAN cannot reach the Internet. Based on the topology and router output shown, which command should be issued on the router to correct the problem? A.    Branch(config-if)# no shutdownB.    Branch(config-if)# duplex fullC.    Branch(config-if)# no keepaliveD.    Branch(config-if)# ip address 192.168.10.30 255.255.255.240E.    Branch(config-if)# bandwidth 100F.    Branch(config-if)# encapsulation 802.3 Answer: D QUESTION 227What are three valid reasons to assign ports to VLANs on a switch? (Choose three.) A.    to make VTP easier to implementB.    to isolate broadcast trafficC.    to increase the size of the collision domainD.    to allow more devices to connect to the networkE.    to logically group hosts according to functionF.    to increase network security Answer: BEF QUESTION 228Which protocol provides a method of sharing VLAN configuration information between switches? A.    VTPB.    STPC.    ISLD.    802.1QE.    VLSM Answer: AExplanation:Understanding VLAN Trunk Protocol (VTP)http://www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080094c52.shtmlIntroductionVLAN Trunk Protocol (VTP) reduces administration in a switched network. When you configure a new VLAN on one VTP server, the VLAN is distributed through all switches in the domain. This reduces the need to configure the same VLAN everywhere. VTP is a Cisco-proprietary protocol that is available on most of the Cisco Catalyst series products. QUESTION 229Refer to the exhibit. To what does the 128 refer in the router output O 168.12.240/30 [110/128] via 192.168.12.233,00:35:36, Serial 0? A.    OSPF costB.    OSPF priorityC.    OSPF hop countD.    OSPF ID numberE.    OSPF administrative distance Answer: A QUESTION 230Assuming the default switch configuration, which VLAN range can be added, modified, and removed on a Cisco switch? A.    1 through 1001B.    2 through 1001C.    1 through 1002D.    2 through 1005 Answer: B !!!RECOMMEND!!! 1.|2016/12 New 200-105 Exam Dumps (PDF & VCE) 346q Download:http://www.braindump2go.com/200-105.html2.|2016/12 New 200-105 Study Guide: YouTube Video: YouTube.com/watch?v=MPVtnwlwW3E --------------------------------------------------- Images: --------------------------------------------------- --------------------------------------------------- Post date: 2016-12-06 07:54:32 Post date GMT: 2016-12-06 07:54:32 Post modified date: 2016-12-06 07:54:32 Post modified date GMT: 2016-12-06 07:54:32 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com