[2017-New]100% Real NS0-158 Exam Dumps PDF and VCE 121Q-Braindump2go[67-77]

2017 May New NS0-158 Exam Dumps with VCE and PDF Updated in www.Braindump2go.com  Today!
100% Real Exam Questions! 100% Exam Pass Guaranteed!

1.|2017 New Version NS0-158 Exam Dumps (PDF & VCE) 121Q&As Download:
http://www.braindump2go.com/ns0-158.html

2.|2017 New Version NS0-158 Exam Questions & Answers Download:
https://drive.google.com/drive/folders/0B75b5xYLjSSNUWNTQ3dmbXc1d2s?usp=sharing

QUESTION 67
Which two SMB versions does Data ONTAP Cluster-Mode support? (Choose Two)

A.    SMB 1.0
B.    SMB 2.0
C.    SMB 3.0
D.    SMB 4.0

Answer: BC
Explanation:
Since clusterer Data ONTAp 8.2 SMB 3.0 is supported.
https://library.netapp.com/ecmdocs/ECMP12454941/html/GUID-3E1361E4-4170-4992-85B2-FEA71C06645F.html ¹

QUESTION 68
Which Data ONTAP Cluster-Mode clone technology will lock a Snapshot copy?

A.    LUN Clone
B.    Snapshot Clone
C.    Volume Clone
D.    Aggr Clone

Answer: A

QUESTION 69
Which statement is true about NFS exports in Data ONTAP Cluster-Mode?

A.    Export policies are created and modified by editing /etc/exports.
B.    Export can be either persistent or temporary.
C.    Export policies and rules are stored in the RDB.
D.    Both A and B
E.    Both B and C

Answer: C

QUESTION 70
Administrator can natively run Data ONTAP-7 Mode commands in what shell?

A.    Adminshell
B.    Clustershell
C.    Nodeshell
D.    Systemshell

Answer: C

QUESTION 71
What command starts recording the current CLI session into a file?

A.    system cli record
B.    system record start
C.    system script record
D.    system script start

Answer: D

QUESTION 72
What three protocols obtain the Data ONTAP software image? (Choose three)

A.    CIFS
B.    FTP
C.    HTTPS
D.    HTTP
E.    NFS

Answer: BCD

QUESTION 73
What three privilege leves are found in clustered Data ONTAP? (Choose three)

A.    admin
B.    advanced
C.    backup
D.    diagnostic
E.    manage
F.    single_user

Answer: ABD

QUESTION 74
A customer wants to use jumbo frames on an interface group called a0a. Interface group a0a contains ports e0c and e0d. Additionally, the customer is using VLAN tagging for VLANs 510 and 520. VLAN 510 will use jumbo frames but VLAN 520 will not. When the customer tries to enable jumbo frames on a0a- 510 the command fails.
What caused the failure?

A.    The MTU size must be set on the broadcast domain to which the ports belong.
B.    The LIF corresponding with VLAN 510 is not configured for jumbo frames.
C.    Ports e0c and e0d have conflicting MTU sizes configured.
D.    Jumbo frames must be enabled from the advanced privilege set.

Answer: A

QUESTION 75
You change the volume junction-path of vol1 from /vol/vol1 to /vol1.
NFS clients are unable to connect to the new path/vol1.
Which mirrors need to be updated to solve this problem?

A.    TDP mirrors of the SVM root volume.
B.    XDP mirrors of the SVM root volume
C.    DP mirrors of the SVM root volume
D.    LS mirrors of the SVM root volume

Answer: D
Explanation:
The recommended backup strategy is LS mirror. So, maybe, the LS mirror is not updated.
Transition mirrors for a svm root volume are very unusual!

QUESTION 76
You just added a vSphere host to your environment that needs access to the existing NFS datasrtore. The applicable export policy is named VMW, and each host's IP address has been given access. What should you do to grant the new host access to the NFS datastore?

A.    Create a new volume.
B.    Create a new rule under the VMW export policy.
C.    Create a new SVM.
D.    Create a new export policy for the new host.

Answer: B
Explanation:
A new SMV is never the correct way to add a host to a existing datastore.
To add a host to existing data, a rule is the right way.

QUESTION 77
A NetApp cluster is connected to two network switches for resiliency. One of the network switches loses power. Most LIFs on the cluster automatically recover from the switch failure to and are reachable through the network. One LIF used for CIFS access is not reachable through the network until power is restored to the failed switch.
Which two areas should be investigated to determine the problem? (Choose two.)

A.    The protocols allowed on the LIFs.
B.    The LIFs failover-group configuration.
C.    The LIFs home port.
D.    The broadcast domain's member ports.

Answer: BD

1.|2017 New Version NS0-158 Exam Dumps (PDF & VCE) 121Q&As Download:
http://www.braindump2go.com/ns0-158.html

2.|2017 New Version NS0-158 Study Guide Video:

YouTube Video: YouTube.com/watch?v=5Dhu18qCw4Q ²

1. https://library.netapp.com/ecmdocs/ECMP12454941/ht ml/GUID-3E1361E4-4170-4992-85B2-FEA71C06645F.html
2. http://www.youtube.com/watch?v=5Dhu18qCw4Q